







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Boulder City Homeowners Choose Kohler Construction
Penhallow Remodeling Boulder City provides independent Kohler construction and repair service for homeowners across Boulder City, NV – installing new Kohler fixtures and fixing the ones already in your home. What sets our Kohler work apart is pattern recognition: we see the same cartridge failures, the same finish wear, and the same fit issues across Boulder City homes often enough that we can usually name the problem before we open a wall. We are an independent remodeling resource. We are not a Kohler-authorized dealer or service provider, and Kohler has not trained or endorsed us. Our technicians have up to 22 years of experience working with Kohler products, and every job comes with a written price before work starts. Call (844) 834-9740 for a free estimate.

Why Trust Penhallow Remodeling Boulder City for Your Kohler Construction?

Our technicians know Kohler products from the inside of the valve body out. We’ve pulled enough scaled-up Forte and Purist cartridges, replaced enough Memoirs fill valves, and reset enough Tresham vanity tops that the brand’s quirks are familiar work rather than a learning curve. That matters when you’re choosing parts on a fixture that’s already installed and you want the repair to fit the existing trim exactly.
We use OEM Kohler parts wherever the repair needs to match a finish or seat into a specific valve body, which keeps your fixture under its manufacturer warranty instead of voiding it with a mismatched aftermarket cartridge. Tearing into a valve without the right tool or a replacement that isn’t spec’d to the original body is where warranty problems start.
Behind the Kohler work sits the same written promise we put on every project: a written price up front, a real arrival window, background-checked and uniformed technicians, and the 365-Day Done Right Promise. If something we installed fails inside that year, we come back and fix it at no charge. Say the price before the work. Show up in the window we gave. That’s the standard we hold on a cartridge swap and on a full bathroom remodel alike.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Kohler Construction Problems We Fix in Boulder City
Boulder City homes put Kohler fixtures through a specific set of conditions – hard water, desert heat, and in the historic core, plumbing that predates the fixtures by decades. Here are the calls we field most often.
- Memoirs toilet fill valves and flush canisters that stick or run intermittently. After a few years, the fill valve or the flush canister inside a Memoirs or Memoirs Stately toilet starts hanging up – the tank refills on its own at 2 a.m., or the flush gets weak and needs two pushes. The cause is usually mineral scale on the canister seal combined with an aging fill valve, not a failure of the bowl itself. A new OEM fill valve and canister gasket usually restores a clean flush for a fraction of a replacement.
- Forte and Purist shower cartridges that seize or drip. Southern Nevada’s hard water leaves calcium and magnesium deposits inside the ceramic cartridge, and once the cartridge scales up, the handle stiffens and the shower drips even when it’s fully off. This is the single most common Kohler call we get. The fix is pulling the cartridge with the correct Kohler removal tool and replacing it – not forcing the handle, which is how valve bodies get scored.
- Tresham vanity finishes that blister or peel near the sink edge. Tresham vanities are a popular pick for bathroom remodels, but standing water left on the countertop edge or around the sink rim will work under the finish over time, especially where the top meets the cabinet. In a dry climate the wood moves, and moisture sitting in that joint accelerates the damage. The long-term answer is usually a properly sealed countertop or a stone top that shrugs off the water.
- Bellwether tub drains and overflow gaskets that leak at the shoe or overflow plate. A Bellwether or Villager tub that leaks isn’t usually cracked – the rubber gasket at the drain shoe or behind the overflow plate has dried out and failed, and water seeps under the tub. It reads as a mystery stain on a ceiling below. Replacing the gasket and re-seating the drain fixes most of these without pulling the tub.
- Obsolete trim and discontinued internal parts. When a Kohler valve body is cracked or the trim is no longer produced, chasing discontinued internals gets expensive fast. At that point a current Kohler trim-and-valve upgrade is the smarter spend, and it’s the upgrade most Boulder City owners end up happier with.
One thing worth flagging for anyone with an older home here: the historic core of Boulder City is built from 1930s poured-concrete and masonry walls rather than standard wood frame. When we open a wall to reach a shower valve or replumb a vanity, we’re often cutting into solid Depression-era concrete, and that changes the approach on the front end. It’s why we look before we quote.
Kohler Parts & Our Repair-vs-Replace Approach

Parts get chosen per job, not from a shelf. We don’t claim to stock Kohler parts locally – the right call is made once we’ve seen the fixture and know what it needs.
- OEM Kohler parts for cartridges, fill valves, and any trim that has to match an existing finish or seat into a specific valve body. This is the warranty-safe path and the one we default to on visible fixtures.
- Quality aftermarket equivalents for concealed items – supply lines, gaskets, washers – where the original is no longer produced and the substitute doesn’t affect the finish or the fit.
- Fixture replacement when a valve body is cracked or a tub is structurally compromised. Chasing obsolete Kohler internals on a failing body usually costs more than upgrading to a current model that carries a fresh warranty.
We tell you which path makes sense and why, in writing, before any work starts. If a repair will get you another decade, we’ll say so. If it won’t, we won’t pretend otherwise. Call (844) 834-9740 for a free estimate and an honest read on your fixture.
Our Kohler Service Process – Step by Step
- 1
Diagnosis. We identify the exact Kohler model line and valve body, then trace the symptom to its cause – a scaled cartridge, a stuck canister, a failed gasket – rather than guessing at the fixture.
- 2
Repair or install. We shut off the water, use the correct Kohler tools to pull cartridges or canisters, and install OEM parts matched to your existing finish and valve. For new installs, we set the fixture level and sealed for Boulder City’s hard water and heat.
- 3
Test. We run the fixture through a full cycle – flush, drip-check, drain test – and confirm no leaks at the shoe, overflow, or supply connections before we call it done.
- 4
Warranty. Every repair and install leaves with a written guarantee and the 365-Day Done Right Promise backing it. If it fails inside the year, we return and fix it at no charge.
See the difference
Before
After
Before
After
Before
AfterKohler Products We Service & Install in Boulder City

We work across the Kohler lines Boulder City homeowners actually own and choose: the Memoirs and Memoirs Stately toilet and vanity suites; the Tresham vanity line and Kohler freestanding tubs; the Forte and Purist shower trim and valve systems; and the Bellwether and Villager tubs. On the installation side, our most requested Kohler projects are walk-in shower installation, bathroom vanity installation, and tub-to-shower conversion – three jobs where getting the valve, drain, and finish right the first time saves you a callback later. We’ll match a current Kohler series to your space and budget, or source trim that coordinates with what’s already there.
On a walk-in shower or a tub-to-shower conversion, we also account for Boulder City’s conditions: heat that punishes cheap finishes and monsoon-season moisture that finds any gap in the waterproofing. Tile over a cement board substrate (the moisture-resistant layer behind your tile), seated drains, and correctly sloped pans mean the shower you install in 2026 still looks right years from now.
We Also Service These Brands
Kohler is one brand in a bigger toolkit. Penhallow Remodeling Boulder City also installs and services KraftMaid cabinetry, Cambria quartz countertops, Toto toilets, and Silestone surfaces, alongside Moen, Blanco, Delta, and more. That matters when a remodel mixes brands – a Kohler shower valve under a Cambria-topped vanity with a Toto toilet nearby – and you want one team who can coordinate the whole bathroom instead of three who don’t talk to each other.
FAQs – Kohler Construction Service in Boulder City
No. Penhallow Remodeling Boulder City is an independent Kohler service provider and is not affiliated with, authorized by, or endorsed by Kohler. We work on Kohler fixtures because Boulder City homeowners own them and ask us to, and we bring the same written price and written guarantee we put on every project. Call (844) 834-9740 for a free estimate.
Yes – we use genuine Kohler OEM cartridges, fill valves, and trim parts on any repair that needs to match an existing finish or fit a specific valve body. For concealed items like supply lines and gaskets where the original is no longer produced, a quality aftermarket equivalent is acceptable. We’ll tell you in writing which parts a job calls for and why. Call (844) 834-9740 to talk through your fixture.
Most Kohler cartridge, fill-valve, and gasket repairs are completed in a single visit, while a full fixture install or a tub-to-shower conversion is scheduled as a larger project. Timing depends on the model and whether parts need to be ordered. We give you a real arrival window and a written scope before work starts. Call (844) 834-9740 for a free estimate and a realistic timeline.
We cover the Kohler lines Boulder City homes most often have: Memoirs and Memoirs Stately toilets and vanities, Tresham vanities and freestanding tubs, Forte and Purist shower trim and valves, and Bellwether and Villager tubs. If you’re unsure which series you have, the model number is usually stamped inside the tank lid or behind the trim. Call (844) 834-9740 and we’ll help identify it.
Not when the work is done correctly. Using OEM parts matched to your valve body and finish, and following Kohler’s specified procedures, keeps your manufacturer warranty intact – mismatched or forced parts are what void it. We’re careful about exactly that on every Kohler repair. Call (844) 834-9740 for a free estimate.
Kohler work in Boulder City ranges from a few hundred dollars for a cartridge or fill-valve replacement up to full bathroom remodel pricing depending on scope. Here are the current ranges for the projects we do most.
| Project | Typical Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Shower Replacement | $3,000 – $8,500 |
What moves the number: which Kohler series you choose, whether we’re opening a wall, and whether the existing plumbing and substrate need work. You get a written price before any work starts – the number on day one is the number on the invoice. Call (844) 834-9740 for an exact quote, and estimates are free.
Book Your Kohler Service in Boulder City, NV
Whether it’s a dripping Kohler Forte cartridge, a Memoirs toilet that won’t stop running, or a full tub-to-shower conversion with current Kohler trim, Penhallow Remodeling Boulder City is ready to help. You’ll get a written price before work starts, background-checked and uniformed technicians, and the 365-Day Done Right Promise in writing. Call (844) 834-9740 for your free estimate.
Written by the team at Penhallow Remodeling Boulder City.












