







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Delta Bathroom Remodeling in Boulder City: What to Know First
Delta bathroom remodeling in Boulder City typically runs $9,000 – $28,000, and most full baths take two to four weeks from demo to final walkthrough. We’re an independent Delta service provider, which means we work on the fixtures you already own (Delta or otherwise) without any manufacturer authorization or affiliation, and we give you a written price before demo day, not after.

This page is for Boulder City homeowners with Delta fixtures who need a bathroom rebuilt around them, or replaced because a part finally gave out. If that’s you, the fastest path to a real number is a call. Reach us at (844) 834-9740 and a live person answers, day or night.
How Delta Products Fail – and How We Fix Them
Delta makes dependable fixtures, but nothing in a wet room lasts forever. Here’s what we actually see when we open up bathrooms around Boulder City, and what we do about it.
- Monitor 13 and 14 series shower valves that drip or run lukewarm. The cartridge inside these single-handle valves wears at the seats, and once the rubber starts to pit you’ll get a slow drip or a temperature that won’t hold. Our fix is a cartridge swap with the correct OEM replacement, not a knockoff, because aftermarket cartridges for these valves are the number-one cause of a repair that fails again in a year.
- Older two-handle Delta lavatory faucets that seize at the stem. Hard water scaling is the culprit, and Boulder City’s water runs mineral-heavy, so stems and seats crust over faster here than in softer-water towns. We rebuild the stem and seats when the body is sound, and we tell you honestly when re-chroming our way around a worn body isn’t worth it.
- Delta Hycroft and Classic tub/shower trim with corroded escutcheons. The decorative plate behind the handle traps moisture against the wall, and over time you’ll see a rust bloom or a chalky ring. That’s usually the first visible sign the substrate (the moisture-resistant layer behind your tile) has been wet. We open the wall, replace the compromised cement board, and reset the trim so it drains instead of pooling.
- Tub-to-shower conversions where the old Delta valve is reused. Homeowners often keep a working valve to save money, and that’s fine, but the rough-in must be reset to the right depth for new tile or the handle won’t seat and the trim won’t sit flush. We check the rough-in depth before tile goes up, not after.
- Delta toilets and vanities fighting a small footprint. In Boulder City’s older ranch-style homes, a full-size vanity and a round-front toilet cramp the room. We measure and re-layout around a new shower or a shorter vanity, and we keep the existing Delta fixtures when they’re still good, because replacing things that work is just spending money you don’t need to spend.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Delta Bathroom Remodeling Process
- 1
Call and site visit. You call, we schedule a real arrival window, and a background-checked, uniformed technician walks the bathroom with you. We identify every Delta fixture by model where we can and note what’s failing.
- 2
Written price before any work starts. You get a written number, line by line, not a range or a verbal ballpark. That’s The Kingswell Way: say the price before the work.
- 3
Parts decision. We lay out OEM versus quality aftermarket for each part and explain the trade-off. OEM parts cost a little more and hold up, which is why we lean that way on cartridge and valve work.
- 4
The remodel. Demo, substrate, rough-in, tile, fixtures, done in a clean, protected job site.
- 5
Test and walkthrough. We run every fixture hot and cold, check for leaks at the valve and drain, and walk it with you before we call it done.
- 6
The 365-Day Done Right Promise. If the work fails inside the guarantee period, we come back and fix it at no charge. That’s in writing on every project.
See the difference
Before
After
Before
After
Before
AfterWhat Delta Bathroom Remodeling Costs in Boulder City

Here’s what Boulder City homeowners actually pay, based on the work we quote most often.
| Job | Typical Range |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
Several things move that number: whether the layout changes, tile choice, whether the substrate behind the wall is sound, and whether you’re keeping your Delta fixtures or replacing them. Countertop and fixture brands you choose (Cambria, Kohler, Toto) shift it too. Every quote is free, and the written price you get on day one is the number on your invoice. Call (844) 834-9740 for an exact quote.
Why Boulder City Homeowners Call Penhallow Remodeling Boulder City for Delta Work
We put the price and the guarantee in writing before a single tile is set. Our technicians have up to 22 years of experience, and they know the difference between a Delta cartridge that needs swapping and a valve body that needs replacing. If a repair fails, we come back free of charge, no service call fee, no re-inspection charge. You get background-checked, uniformed technicians on every job, so you know exactly who’s walking into your home.
When a bathroom needs more than Delta work, we install KraftMaid and Wellborn cabinetry, plus Kohler and Toto fixtures and Cambria and Silestone countertops, so the brands behind the guarantee are solid. As an independent Delta service provider, we’re not authorized by Delta, but our own 365-Day Done Right Promise backs the work.
FAQs

Does remodeling my bathroom void my Delta faucet warranty? Not automatically, but how the fixture is installed and whether OEM parts are used matters. Delta’s warranty covers defects in materials and workmanship, and improper installation can affect a claim. We install to spec and use OEM parts so your coverage stays intact, and we’ll tell you plainly if a repair could put a warranty at risk. Call (844) 834-9740 with your model number and we’ll talk it through.
Can you get Delta replacement parts for older fixtures? In most cases, yes. Delta’s cartridge and trim lines are widely stocked, and we source OEM parts specifically. For discontinued finishes or bodies, we’ll lay out your options honestly, including replacing the fixture when a part is no longer made. Estimates are free.
Should I repair or replace a failing Delta shower valve? If the body is sound and only the cartridge is failing, a cartridge swap usually makes sense and costs far less. If the valve is seized, corroded, or the wrong depth for new tile, replacement as part of the remodel is the smarter spend. We diagnose before we quote, so the recommendation fits the actual condition. Call (844) 834-9740 to schedule.
How long does a Delta bathroom remodel take in Boulder City? A full bath runs two to four weeks; a tub-to-shower conversion or shower replacement is often faster. The timeline depends mostly on tile and whether the wall behind the fixtures needs substrate work. We give you a real timeline with the written price, and we don’t promise same-day remodels, because nobody does those well.
Do you work on Delta fixtures only? No. Delta is one brand we service well, alongside Kohler, Moen, Grohe, Toto, and others. If your bathroom mixes brands, that’s normal and we handle it. Call (844) 834-9740 for a free estimate.
Ready for a written price and a guarantee you can hold us to? Call Penhallow Remodeling Boulder City at (844) 834-9740 for a free estimate on your Delta bathroom remodel. A live person answers 24/7, and we’ll give you a real number before any work starts.
Written by the team at Penhallow Remodeling Boulder City, serving Boulder City and nearby areas.












