







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Boulder City Homeowners Choose Cambria Construction
Penhallow Remodeling Boulder City provides independent Cambria quartz fabrication, installation, and repair for homeowners across Boulder City, Nevada. We’re not affiliated with or authorized by Cambria; we’re an independent specialist, and our credibility comes from hundreds of Cambria installations and repairs across the Las Vegas Valley and from knowing exactly how these surfaces fail in desert conditions. What sets our Cambria work apart is the written price you get before we cut a single slab, backed by the 365-Day Done Right Promise. Call (844) 834-9740 to schedule a free estimate.

Why Trust Penhallow Remodeling Boulder City for Your Cambria Construction?

Our technicians have up to 22 years of experience, and much of that has been spent working with Cambria’s specific quartz formulations. Cambria is a quartz surface, not granite or a porcelain slab, which means it behaves differently under heat, impact and moisture. Our crews know which Cambria designs are more forgiving and which ones show every fingerprint.
When a chip or crack needs fixing, we work with OEM-matched Cambria quartz wherever the original design is still available, and we color-match with Cambria-approved epoxy rather than a generic repair compound that yellows under UV. That matters in Boulder City, where sunlight comes through single-pane windows at an angle most of the year.
Every repair and installation we do is covered by the same written guarantee we put on all our work: the 365-Day Done Right Promise. If something fails inside that year, we come back and fix it at no charge, and a failed repair gets a free return visit with no service call or re-inspection fee. We’re independent, not authorized by Cambria, and we’ll tell you plainly when a warranty claim should go through Cambria instead of through us.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Cambria Construction Problems We Fix in Boulder City
Boulder City’s historic core is full of 1930s Bureau of Reclamation bungalows with poured-concrete walls and small footprints, and the newer homes sit on the edges against federal land. That mix of old concrete and desert soil creates a specific set of Cambria problems we see again and again.
- Edge chipping at undermount sink cutouts. Concentrated impact or inadequate support behind the cutout causes this, and it shows up most in thinner profiles like Cambria Torquay. A dropped pot or a heavy cast-iron skillet at the wrong angle is often all it takes.
- Thermal shock cracking near cooktops and ovens. Quartz handles heat better than many surfaces, but a pan pulled straight from a 400°F oven and set down on Cambria Brittanicca can crack the slab from the inside out. We see this most in kitchens where the counter doubles as a landing zone.
- Staining and dulling on lighter designs. Cambria Ella and Brittanicca are beautiful and unforgiving. Acidic cleaners, lemon juice left overnight, or prolonged water sitting at a seam will etch the finish and leave a dull patch that polishing alone won’t fix.
- Seam separation on islands over 8 feet. Dry, high-shrink-swell soils are common in Boulder City, and when the ground moves seasonally the cabinet base shifts just enough to pull a seam apart. Long islands are the most vulnerable because a small deflection at one end translates to a wide gap at the joint.
- Adhesive failure at backsplash joints. The same seasonal movement that opens seams also breaks the adhesive bond where Cambria meets a backsplash, especially on walls backed by original Depression-era concrete that expands and contracts differently than modern framing.
Cambria Parts & Our Repair-vs-Replace Approach
For Cambria repairs, we source OEM-matched quartz for patches or replacements only when the original design is still available from Cambria. When it isn’t, we source a close visual match from quality aftermarket quartz rather than leaving you with a mismatched patch. We don’t claim to stock Cambria parts locally; every piece is ordered for your specific job.
Our rule on repair versus replace is simple. A single isolated chip or a hairline crack gets stabilized and color-matched. Multiple failing seams, or a slab that’s lost structural integrity, means full replacement is the honest call, and we’ll tell you that before you spend money on a repair that won’t hold. Here’s what each piece of a Cambria job typically runs in Boulder City:
| Service | Typical Price Range |
|---|---|
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Backsplash Installation | $800 – $2,500 |
Call (844) 834-9740 for an exact quote on your Cambria project. Estimates are free.

Our Cambria Service Process – Step by Step
- 1
Diagnosis. We inspect the substrate, seam integrity and cabinet base, because in Boulder City a crack in Cambria is often a symptom of movement underneath rather than a surface problem. We check for deflection and note the soil conditions around the foundation.
- 2
Repair or install. For a chip or crack, we stabilize the area and color-match with Cambria-approved epoxy; if the crack exceeds 1/8 inch we recommend replacing the affected section. For new installs, we template precisely, cut to fit the actual cabinets and confirm seam placement so joints fall where they’re least visible and least stressed.
- 3
Test and finish. We check that seams sit flush, that the surface is level, and that the sink cutout has proper support behind it. We clean the work area before we leave, every time.
- 4
Warranty. You get the 365-Day Done Right Promise in writing, and if a repair fails inside that window we return at no charge. Cambria’s own lifetime warranty on the material sits alongside ours.
See the difference
Before
After
Before
After
Before
AfterCambria Products We Service & Install in Boulder City
We work with the full Cambria quartz line, including the designs homeowners ask for most in Boulder City: Cambria Blackwood with its deep marbled veining, Brittanicca in its softer gray and white, Ella for a clean bright look, and Torquay for a warmer neutral tone. We handle kitchen countertops, islands, bathroom vanities and backsplashes, plus repairs and refinishing on existing Cambria surfaces. Whatever design you’ve chosen or already own, we can template, install, repair or replace it.
We Also Service These Brands
We’re a Cambria specialist, not a Cambria-only shop. Penhallow Remodeling Boulder City also installs and services KraftMaid cabinetry, Kohler and Toto fixtures, and Silestone countertops, so you’re not juggling three different contractors when a kitchen comes together. Ask us to quote the whole scope and we’ll price each brand line clearly.
FAQs – Cambria Construction Service in Boulder City

Is Penhallow Remodeling Boulder City authorized by Cambria?
No. We’re an independent Cambria service provider and we’re not affiliated with or authorized by Cambria. That means we can offer honest advice on when a warranty claim should go through Cambria and when it’s a repair we handle. Call (844) 834-9740 to talk through your situation.
Do you use genuine Cambria/OEM parts?
We use OEM-matched Cambria quartz whenever the original design is still available, and a close visual match from quality aftermarket quartz when it isn’t. We’ll tell you upfront which applies to your job.
How long does Cambria service take?
A chip or crack repair is typically a single visit, while a full countertop or island installation takes longer because of templating and fabrication lead time. We give you a real timeline with your written price before any work starts.
What Cambria models/series do you cover?
We cover the full Cambria line, including Blackwood, Brittanicca, Ella and Torquay. Design availability changes over time, so we’ll confirm what’s currently available before ordering.
Will service void my Cambria warranty?
Properly performed repairs and installations don’t void Cambria’s warranty, but improper repairs can. We follow Cambria-approved methods and color-match materials specifically to protect your coverage, and we’ll flag anything that could put it at risk.
How much does Cambria construction cost in Boulder City?
Countertop installation runs $2,000 – $6,500, kitchen island installation $3,000 – $10,000, bathroom vanity installation $800 – $3,000, and backsplash installation $800 – $2,500. Call (844) 834-9740 for an exact quote. Estimates are free.
Book Your Cambria Service in Boulder City, NV
Whether you’ve got a chipped Torquay edge, a separated island seam, or an entire kitchen that needs Cambria counters, we’ll give you a written price and a real arrival window before we start. Call (844) 834-9740 to schedule your free estimate in Boulder City, NV.
Written by the team at Penhallow Remodeling Boulder City.












