







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterBacksplash, Tile & Flooring in Boulder City, NV
Backsplash, tile and flooring work is the finish layer of a kitchen: the tile that protects your wall from steam and grease, the floor that takes years of dropped pans, and the grout lines that either get cleaned or get ignored. Homeowners in Boulder City call us when a dated backsplash is the last 1990s thing left in the room, when the floor has cracked along a seam, or when a previous tile job is popping loose because nobody set it on a proper substrate. We finish these jobs with a written price before work starts and a 365-Day Done Right Promise behind the install. Call (844) 834-9740 and a live person answers, day or night.
This work sits inside our broader Kitchen Remodeling service, which means we treat a backsplash the same way we treat a cabinet run: measure twice, name the substrate, and tell you the number before we touch anything. If you’re planning a full kitchen rather than a single finish upgrade, start with our Kitchen Remodeling in Boulder City page and we’ll scope the tile and flooring within it.

When You Need Backsplash, Tile & Flooring
- The backsplash is the oldest surface in the room. Four-inch builder tile from the original build, grout gone dark, a couple of cracked pieces above the range. It’s a common Boulder City look in homes built during the 1970s and 1980s boom, and it’s one of the fastest visual upgrades in a kitchen.
- Tile is lifting or sounding hollow. Tap across a floor or wall and listen for a hollow thud. In Boulder City, that’s often a bonding problem rather than a tile problem. Tile set directly on a floor that flexes will crack again no matter how good the grout is, which means the fix starts underneath.
- Grout lines are cracking along seams. Cracks that follow a straight line usually mean movement in the subfloor or wall board below. Re-grouting those without addressing the cause is a job that fails in about a year.
- You’re changing countertops and the backsplash has to follow. New countertops almost always mean new backsplash height and new edges. Doing the countertop now and the tile later usually costs more, because the plumber and the tile setter each come out twice.
- The floor is worn through in traffic lanes. Vinyl or laminate worn thin at the sink and range, or tile that’s chipped at the corners. Kitchens in Boulder City see a lot of hard water and dust, and both are hard on flooring seams.
- Water damage behind the counter or under the sink. Soft drywall, bubbling paint, or grout that never dries. That’s a moisture problem first and a tile problem second.
Our Backsplash, Tile & Flooring Process
The word that matters most in a tile job is substrate – the layer your tile actually bonds to. Most failed tile work we’re called out to fix failed at the substrate, not at the tile. Here’s how we work through a Boulder City project.
- Walkthrough and written price. We look at the existing tile, check the wall or floor underneath, and hand you a written price before any work begins. Not a range read off a clipboard. A written number you can hold us to. That’s The Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it.
- Demo and substrate assessment. Out comes the old tile and the old adhesive. We check for moisture damage, soft drywall, or a subfloor that moves. On a kitchen floor, we confirm whether a cement board substrate (the moisture-resistant layer behind your tile) or an uncoupling membrane is needed. This is the step dishonest bids skip.
- Layout before the first tile is set. We dry-fit and mark the layout so cut tiles land in the least visible corners and grout lines line up with cabinet edges and the range hood. This is where a good tile job and an average one look completely different.
- Install with proper setting materials. Modified thin-set, the right trowel notch, and back-buttering on large-format tile so there are no hollow spots. We set the backsplash to the line you approved and seal the countertop joint properly.
- Grout and cure. Grout goes in after the setting material cures. We use sanded or unsanded grout depending on joint width, and we seal grout after it cures so the lines stay clean and hold up to kitchen steam and cleaning sprays.
- Final walkthrough with you. We walk the job with you, point out anything that needs touching up, and confirm the work in writing under the 365-Day Done Right Promise. If something fails inside that period, we come back and fix it at no charge. No service call, no re-inspection fee.

Backsplash, Tile & Flooring Pricing in Boulder City
Tile and flooring pricing in Boulder City depends mostly on the material you choose, the condition of what’s underneath, and how much cutting the layout requires. Here are honest ranges for real projects. Every one of these numbers is confirmed in a written price before work starts.
| Project | Typical range | What drives the number |
|---|---|---|
| Backsplash, standard 4-inch tile | $600 – $1,200 | Wall length, outlet cutouts, existing tile removal |
| Backsplash, large-format tile (12×24 or larger) | $1,100 – $2,300 | Substrate prep, pattern matching, fewer grout lines |
| Backsplash, mosaic or patterned tile | $1,400 – $2,800 | Sheet layout, pattern continuation around outlets |
| Floor tile install (per sq ft, labor plus setting material) | $8 – $16 / sq ft | Subfloor condition, size of tile, removal of old floor |
| Substrate repair or replacement | $400 – $1,600 | Square footage, moisture damage, leveling needs |
| Grout removal and re-grout (per sq ft) | $4 – $8 / sq ft | Grout width, joint condition, whether tile is sealed |
Two variables swing these numbers the most. First, what’s underneath. A clean, flat substrate saves money. A subfloor that flexes or a wall with water damage adds prep work and time. Second, the tile itself. Porcelain and ceramic both work well in a kitchen, but large-format and patterned tile take more cutting and layout planning than a standard 3×6 subway. We install tile from recognized trade brands, and we’ll talk through which option line matches your kitchen’s traffic and cleaning habits rather than the showroom photo.
Free estimates are standard. We give you a written number and a written guarantee before any work starts. Call (844) 834-9740 for an exact quote.
FAQs – Backsplash, Tile & Flooring
How much does a tile backsplash cost in Boulder City?
A standard 4-inch tile backsplash in Boulder City typically runs $600 to $1,200 installed, while large-format or patterned tile can run $1,100 to $2,800 depending on layout and substrate prep. The biggest cost drivers are the tile you choose and whether the wall behind the old tile needs repair. Call (844) 834-9740 for a written price – estimates are free.
Can I get a backsplash installed in a single day?
Most standard backsplashes can be demoed, set and cleaned up in one to two days, though grout needs to cure before the job is truly finished. Large-format or patterned tile takes a bit longer because the layout work is more careful. We’ll give you a written arrival window before the work starts – and we’ll show up inside it.
Why did my old tile crack again after the last repair?
Because the crack was in the tile but the problem was underneath. Cracks that follow a straight line or run along a seam usually mean the subfloor or wall board is moving, and any tile set on a moving surface will crack no matter how good the grout is. Our fix starts with the substrate, not with a fresh tube of caulk. That’s also why we back the work with the 365-Day Done Right Promise: if it fails inside the year, we come back and fix it at no charge.
Do you install kitchen flooring under the cabinets or only up to them?
Most Boulder City homeowners get flooring installed up to the cabinets rather than underneath a full cabinet run. Full install under cabinets makes sense when you’re replacing the cabinets at the same time and want a clean future-proof fit. We’ll tell you which option makes sense once we’ve seen the kitchen.
What’s the difference between porcelain and ceramic tile for a kitchen?
Porcelain is denser and less water-absorbent than ceramic, which makes it a solid pick for a kitchen floor and a backsplash alike. Ceramic is often easier to cut and typically costs less, and it handles a backsplash just fine. Both hold up in a kitchen when they’re set on the right substrate.
Every Penhallow Remodeling Boulder City job is done by background-checked, uniformed technicians, and each arrival window is set in writing before the crew shows up. Our technicians have up to 22 years of experience with tile, substrate prep and finish work. If something fails inside the guarantee period, we return at no charge.
Ready to see a written number for your backsplash, tile or flooring project in Boulder City? Call us at (844) 834-9740 for a free estimate, or ask us about matching tile and flooring with your full Kitchen Remodeling in Boulder City plan.
Written by the team at Penhallow Remodeling Boulder City, serving Boulder City.


